Engine B&S Vanguard, V-Twin
Displacement 49.4 cu. in. (810 cc)
Lubrication Pressure Lube/Filter
Cooling System Air
Air Cleaner Integrated, cyclonic air cleaner with 5-step debris management system
Fuel Type Gasoline – unleaded
Transmission Design-matched hydrostatic system with integral cooling fans. Fully hydraulic, integrated Parker HTE Series transmission with variable displacement piston-type pumps and high-torque wheel motors for each drive wheel.
Steering One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.
Brake System Type Dynamic braking through hydrostatic transmission.
Wheels & Tires
Wheels Drive: 20×8.00×10, turf tread, 4-ply rated | Single Tail: 13×6.50×6 rib tread, pneumatic
Tires, Rear Specification 9×3.50×4 (flat proof), 4-ply rated
Battery 12 Volt
Operating Speed Forward: 0 – 8.0 mph (0 – 12.9 kph) | Reverse: 0-5.5 mph (0-8.9 kph)
Dimensions Blades: 18 in. (45.7 cm) | Trimability: 4.75 in. (12.1 cm)
Spindle Diameter 8 in. (20.3 cm) machined aluminum housing with 6-bolt pattern
Height Cutting: 2.0 – 4.5 in. (5.1 – 11.4 cm) | Seat Back: 45.0 in. (114.3 cm) | Seat Cushion: 29.0 in. (73.7 cm) | ROPS: 64.0 in. (162.6 cm)
Length 59.5 in. (151.1 cm) | Mowing Position: 100.0 in. (254.0 cm) | Folded Up: 87.0 in. (221.0 cm)
Width 42.0 in. (106.7 cm) | Side Discharge: 65.5 in. (166.5 cm) | Mulch: 53.5 in.* (135.9 cm)
Wheelbase 47.0 in. (119.4 cm)
Fuel Capacity 4.0 U.S. Gal (15.1 l)
Weight Uncrated: 1025 lbs. (464.9 kg) | Uncrated (Side Discharge): 375 lbs. (170.1 kg) | Mulching Package: 29 lbs. (13.2 kg)
Seat Type Iso-mounted Premium Comfort Seat. Features include a high-back, deep-cushioned, foam-padded Cordura®-covered, padded arm rests, padded backrest with lumbar support, coil-spring suspension and embroidered Grasshopper logo on seat back.
Construction Material Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. (3) Sentry? spindles and a triple-strength upper deck over 0.50-in. thick in stress zones. Formed double thickness hardened steel truss spindle plane is 0.269 in. – 7.6% thicker than 1/4 in. (6.35 mm)